Veliki kapacitet tokarenja od 82,,/106 mm/153 mm s vrlo jednostavnim sustavom ulaganja komada i velikim provrtom kroz vreteno omogućava da se na ovom stroju mogu obrađivati i vrlo dogačke šipke. CNC sustav je vrlo prilagođen korisniku jer osigurava korištenje manualnog moda, konverzacijsko programiranje kao i korištenje ISO programskih kodova.
Ciklusi za popravke navoja, rezanje navoja i rezanje stožastih navoja je također moguće.
| Swing in gap | mm | 870 |
| Swing over bed | mm | 650 |
| Swing over cross slide | mm | 410 |
| Max. cutting length (with turret) | mm | 1000/1500/2000/3000/4000 |
| X axis travel | mm | 345 |
| Y axis travel (opt.) | mm | +/- 40 |
| Z axis travel | mm | 1150/1650/2150/3150/4150 |
| X axis rapid feed | m/min. | 15 |
| Y axis rapid feed (opt.) | m/min. | 7.5 |
| Z axis rapid feed | m/min. | 15 (up to 2m) / 12 (3m & 4m) |
| Spindle bore | mm | Ø82 (std.) / Ø106 (opt.) / Ø153 (opt.) |
| Spindle speed | rpm | 80-3500 (82 mm) / 80-2400 (82/106 mm) / 80-1480 (153 mm) |
| Spindle motor | kW | 11/15 (up to 2m) / 15/22 (3m & 4m) |
| Machine weight | kg | 3800/4300/4800/5800/6800 |
STANDARD ACCESSORIES:
• Fagor 8055TC/A CNC Controller
• Quick change tool post
• Automatic speed changer
• Chuck sliding guard with interlock device
• Gap bed
• Tailstock (interlock device for 3M & 4M)
• Fully enclosed front guarding with interlock system for center length 40”/60”/80”
• Traveling front single door with interlock safety device for center length 120”/160”
• Coolant system
• Lubrication system
• CE Norms
• Leveling pads
• Tool set & kits
OPTIONAL ACCESSORIES:
• Enlarged 106mm/153mm spindle bore
• Cam lock D1-8 spindle bore for 82mm/106mm spindle
• 2400rpm spindle speed
• 15/22kW spindle motor (up to 1,5M)
• Turret (hydraulic or electric)
• Power turret
• Electric 4 way tool post
• Boring bar base/holder
• C axis / Y axis
• Rear chuck mounting preparation
• Rear chuck guard
• Manual 3-jaw chuck
• Hyd. 3-jaw chuck
• Roller steady rest 20-200mm
• Roller steady rest 180-410mm
• Hydraulic steady rest preparation
• Follow rest 20-200mm
• Enlarged 100mm tailstock quill
• Hyd. tailstock quill
• Tailstock end cover with limit switch
• Full enclosure guarding for 120”/160” length.
• Chip conveyor + wash down system
• Air conditioner for electric cabinet
• Heat exchanger for electric cabinet
• EMC
• Portable MPG
• Transformer
• Tool holders
• Fanuc 0iTD with 8.4” or 10,4” LCD display and Manual Guide 0i
• Siemens 828D basic, 8.4"LCD includes 12/15 kW spindle motor (up to 1,5M)