BNC 2200 ima izrazito napredne karakterisitke kao što je vreteno velike brzine, velika brzina posmaka što sigurno osigurava kratko vrijeme obrade. Stroj može biti korišten kao potpuni CNC stroj ili putem korištenja konverzacijskog programiranja ili čak kao klasični tokarski stroj. Njegova pogodnost je i to što se operator može obučiti za rad na stroju vrlo jednostavno i u vrlo kratkom periodu vremena.
| Swing in gap | mm | 770 |
| Swing over bed | mm | 550 |
| Swing over cross slide | mm | 310 |
| Max. cutting length (with turret) | mm | 1000/1500/2000/3000/4000 |
| X axis travel | mm | 345 |
| Z axis travel | mm | 1150/1650/2150/3150/4150 |
| Rapid traverse (X & Z) | m/min. | 15 (up to 2 m) & 15 (3m & 4m) |
| Spindle bore | mm | Ø82 (std.) / Ø106 (opt.) |
| Spindle speed | rpm | 80-3500 (82 mm) / 80-2400 (82/106 mm) |
| Spindle motor | kW | 11/15 (up to 2m) / 15/22 (3m & 4m) |
| Machine weight | kg | 3800/4300/4800/5800/6800 |
STANDARD ACCESSORIES:
• Fagor 8055 FL CNC Controller
• Quick change tool post
• Automatic speed changer
• Chuck sliding guard with interlock device
• Gap bed
• Tailstock (interlock device for 3M & 4M)
• Fully enclosed front guarding with interlock system for center length 40”/60”/80”
• Traveling front single door with interlock safety device for center length 120”/160”
• Coolant system
• Lubrication system
• CE Norms
• Leveling pads
• Tool set & kits
OPTIONAL ACCESSORIES:
• Enlarged 106mm spindle bore
• Cam lock D1-8 spindle bore for 82mm/106mm spindle
• 2400rpm spindle speed
• 15/22kW spindle motor (up to 2M)
• Turret (hydraulic or electric)
• Power turret
• Electric 4 way tool post
• Boring bar base/holder
• Rear chuck mounting preparation
• Rear chuck guard
• Manual 3-jaw chuck
• Hyd. 3-jaw chuck
• Roller steady rest 20-200mm
• Roller steady rest 150-300mm
• Hydraulic steady rest preparation
• Follow rest 20-200mm
• Enlarged 100mm tailstock quill
• Hyd. Tailstock quill
• Tailstock end cover with limit switch
• Full enclosure guarding for 120”/160” length
• Chip conveyor + wash down system
• Air conditioner for electric cabinet
• Heat exchanger for electric cabinet
• EMC
• Portable MPG
• Transformer
• Tool holders
• Fanuc 0iTD with 8.4” or 10,4” LCD display and Manual Guide 0i
• Siemens 828D basic, 8.4"LCD includes 12/15 kW spindle motor (up to 2M)
• Chip conveyor + wash down system
• Air conditioner for electrical cabinet
• Heat exchanger for electric cabinet
• EMC