Stable Double Column Vertical Machining Center type DMC-B series offers X-axis travel 1700/2200/3200/4200mm, Y and Z-axis travel of 1700 and 850mm with rigid linear roller guide ways enables higher speed and outstanding precision. The construction of the one-piece box type base and the column gives solid support for maximum rigidity and stability.
| DMC-1700B | DMC-2200B | DMC-3200B | DMC-4200B | ||
|---|---|---|---|---|---|
| Table size | mm | 1700x1500 | 2200x1500 | 3200x1500 | 4200x1500 |
| Max. table load | kg | 5000 | 5000 | 8000 | 8000 |
| X axis travel | mm | 1700 | 2200 | 3200 | 4200 |
| Y axis travel | mm | 1700 | 1700 | 1700 | 1700 |
| Z axis travel | mm | 850 | 850 | 850 | 850 |
| Spindle taper | ISO | ISO #50 | ISO #50 | ISO #50 | ISO #50 |
| Spindle speed | rpm | 8000 | 8000 | 8000 | 8000 |
| Main motor (conti./30min) | kW | 15/18.5 | 15/18.5 | 15/18.5 | 15/18.5 |
| X/Y/Z Rapid feed | m/min | 20/20/20 | 16/20/20 | 16/20/20 | 12/20/20 |
| X/Y/Z Cutting feed rate | m/min | 10/10/10 | 10/10/10 | 10/10/10 | 10/10/10 |
| ATC arm type | tool | 32 (std) / 40 (opt) | 32 (std) / 40 (opt) | 32 (std) / 40 (opt) | 32 (std) / 40 (opt) |
| Machine weight | kg | 22500 | 23000 | 24000 | 25000 |
STANDARD ACCESSORIES:
• Fanuc 31iMB controller with 10.4" LCD monitor and Manual Guide i or
Siemens 828D controller with 10.4" LCD monitor
• ZF gear box
• Enclosure guard with top open design
• Screw type chip augers (right & left side)
• Coolant system
• Auto lubrication system
• Spindle oil cooler
• Air blast through spindle (spindle air purge)
• Air blast for work piece (nose)
• Coolant flushing system
• 3 axes way covers
• Automatic lubrication system
• Working lamp
• Operation status light (Work finish light)
• Z axis pneumatic balance system
• Air gun / water gun
• MPG hand wheel
• Heat exchanger
• RS-232 Interface
• Rigid tapping
• Adjusting Tools and box
• Leveling bolts and pads
OPTIONAL ACCESSORIES:
• Fanuc 31iMB controller with 10.4" LCD monitor and Manual Guide i or
Siemens 828D controller with 10.4" LCD monitor
• ZF gear box
• Enclosure guard with top open design
• Screw type chip augers (right & left side)
• Coolant system
• Auto lubrication system
• Spindle oil cooler
• Air blast through spindle (spindle air purge)
• Air blast for work piece (nose)
• Coolant flushing system
• 3 axes way covers
• Automatic lubrication system
• Working lamp
• Operation status light (Work finish light)
• Z axis pneumatic balance system
• Air gun / water gun
• MPG hand wheel
• Heat exchanger
• RS-232 Interface
• Rigid tapping
• Adjusting Tools and box
• Leveling bolts and pads